MPLS Soft WaterCity water, wells and softener settings ยท Minneapolis, MN

Minneapolis Water Softener Questions

Brief answers, each with where it comes from. The most searched questions are first.

Ask about my waterRead the FAQ

Each answer leads with the short version. All price ranges, with the guide and date behind each, are in the Minneapolis water softener cost guide.

Common questions

Do I need a water softener in Minneapolis?

On city water, often not. Minneapolis softens its water centrally, and its 2025 plant record averaged 94 mg/L, about 5.5 grains per gallon. The Minnesota Department of Health says a softener may be needed above 7 grains and that utility-softened water needs no additional softening. Wells, other supplies and personal preference are the exceptions.

How much does water softener installation cost in Minneapolis?

Angi's Minneapolis page, updated July 2026, averages $1,572, with most homeowners paying $210 to $6,288. HomeGuide's 2025 guide puts a salt-based unit at $1,200 to $3,800 installed and a dual-tank unit at $1,700 to $5,000. Treat both as yardsticks for written bids, not as quotes.

Who is allowed to install a water softener in Minnesota?

For paid work, a business with a water conditioning contractor's license, using an installer with a water conditioning or plumbing license (Minn. Stat. 326B.55). Owner-occupants may do the work on their own home if it meets state standards. Ask Minneapolis permit staff whether your job needs a permit.

Does softened water have more sodium?

Yes. Sodium replaces the hardness removed. Nebraska Extension cites about 8 mg/L of sodium per grain removed, so fully softening 5.5-grain city water adds roughly 44 mg/L on top of the 18.6 ppm the city's plant water already averaged in 2025. The Minnesota Department of Health suggests an unsoftened drinking tap or potassium chloride for anyone watching sodium.

Can a softener cause pipe problems?

It can if it over-softens. The Minnesota Department of Health lists pipe corrosion among the drawbacks of home softening, noting that corroded metal can raise lead and copper in drinking water, and says new copper plumbing should run unsoftened for the first few weeks. A correct hardness setting matters more on already-softened city water.

My house is on a private well in Hennepin County. What now?

Test before buying anything. Groundwater in the metro can be far harder than city water; Robbinsdale's wells ran 24 grains before central softening, per the Minnesota Department of Health. MDH lists accredited labs through its Environmental Laboratory Accreditation Program. Iron in a well often needs a filter ahead of the softener.

Is the first visit free?

It depends on the company. Many local specialists don't charge for the first visit; ask when they call, before they come out. Using the form on this site has no cost and no obligation.

What happens after I send the form?

A single independent water treatment specialist working in Minneapolis receives it. MPLS Soft Water sells and installs nothing; it is paid by that specialist for passing the request along. Expect questions about your supply and your current softener before anyone recommends equipment.

What is your water doing?

A sentence is plenty: a softener that runs out of salt too fast, spots that will not go away, a private well, a taste you do not like. One independent water treatment specialist who works in Minneapolis will get in touch.

What's going on?

Only the local specialist gets it, to reach you about this.

Free to ask. No obligation. Many local specialists don't charge for the first visit; ask when they call.

This site is run by a referral service that is paid by the specialists it connects you with. Asking costs you nothing.

A local water treatment specialist who serves Minneapolis will call you back. Your request goes to that one independent specialist, not a list. By sending this you agree they may call or text you about it. Privacy.

Request Ask about my waterSee prices